Accessories

IER2 Call Extension

The IER2 call extension will ring when a call is made from the door station. It can be used with the following Aiphone models.

JP4MED, JO1MDW, JO1MD, JO1FD, JK1MED, JF1MD, JF2MED, IE1ADU, IE1GDU, IE2ADU, IE2A2D, AX8M, AX8MV, TC10M, TC20M, DB1MD, JA2MCD, JA2MECD, KC1MRD, KC1GRD, KB3MRD, MK1GD, MK2MCD, NEM all masters.

IER2 Instruction Manual

TAR3 Plus Call Relay

This relay can be used to provide a relay contact closure when a call is placed from the door station. The TAR3PLUS does not require a separate power supply and can be powered off the same power supply powering the intercom master station. The TAR3PLUS can be used with the following Aiphone models. The TAR3PLUS is suitable for operation from 12 - 24 volts DC and 12 to 16 volts AC

JP4MED, JO1MDW, JO1MD, DB1MD, JK1MED, JF2MED, IE1ADU, IE1GDU, IE2ADU, IE2A2D, AX8M, AX8MV, JA2MCD, JA2MCED, MK1GD, MK2MCD, JK1MD, JF1MD

TAR3 Call Relay (Discontinued)

This relay can be used to provide a relay contact closure when a call is placed from the door station. The TAR3 requires an independent 6 volt power supply and can not share this power supply with the intercom station it is connected to. The TAR3 can be used with the following Aiphone models.

TAR3 Manual

AT406 (AT206), AT306, TBSE

RYAC Call Relay

The RYAC relay can be used to provide a contact closure when a call is placed from a door station or in the TDH system a master station. Powered from 12 volts DC the RYAC can be used with the following Aiphone models.

RYAC Manual

TDH all models, LEF all masters, IE8MD

RYSP Speaker Cut Out Relay (Discontinued)

The RYSP relay is used with the Aiphone TDH system and is used when a PD1 or PD2 paging adaptor is installed and a handset is located in close proximity to a paging speaker which could result in feedback. This speaker is wired through this relay and is cut off when this handset accesses the paging system.

RYSP Manual

RYPA Door Relay

The RYPA is used to connect electric door strikes to some Aiphone stations. It can be used with the following Aiphone models.

LEF5, LEF10, LEF5C, LEF10C, LEF10S, VCM door stations when an AC strike is used

MAWB Auxiliary Relay

This relay can be used to operate a second vehicle gate on a GF system entrance station or provide a contact to operate an external light on KB3MRD and JF2MED. It can be used with the following Aiphone models. Note this relay is not rated to switch 240 Volts.

JF2MED, KB3MRD, GFDAB

GTRY Call Relay

This relay, though it is not really a relay, but a solid state switch. Is used with the GT system to provide an additional output on an entrance station for say a vehicle gate or external light. It can also be connected to an apartment station and will provide an output for a call buzzer which will sound when the apartment is called. A power supply will be required for the buzzer or sounder; also a wiring harness will be required to connect the GTRY to the apartment station. This cable is included with the GT apartment stations.

GFDA RELAY(Discontinued)

This relay is used with the GH and GF digital apartment systems when a contact closure is required when a call is placed at a door station. Compatible with audio and video door stations it is also compatible with direct select or name scroll module type entrances. The GFDARELAY is installed in the entrance station, when any apartment is called from this entrance station the relay contacts on the GFDARELAY will close and remain closed for the duration the entrance station is in communication with the apartment. Requires 24 volt power. A GFDARELAY is required for each entrance station in the system.

RY3DL Door Release Control Relay

The RY3DL relay is used to provide control of multiple door releases with some models. It has NO and NC contacts. It can be used with the following Aiphone models. Note refer to the install manual for the JF2MED and MK2MCD for the latest wiring instructions.

RY3DL Manual

JP4MED, JF2MED, KB3MRD, JA2MCD, JA2MECD, MK2MCD, JM4MED

GHJUNCTION (Discontinued)

This is used to terminate the audio bus wiring in a GF or GH digital apartment system. It has four sets of fused terminals and a set of loop though terminals.

The fused outputs protect the audio bus from short circuits on the bus feeds to apartments or entrance stations.

JPWBA Long Distance Adaptor

The JPWBA is used to increase the cable distance between a colour video door station and the master monitor. It requires 1.2mm polyethylene cable to be used and will not function on any other type of cable. It will increase the cable distance up to 300 meters. It can be used with the following Aiphone model.

The JPWBA also allows a PAL or NTSC camera (switchable) to be installed onto the system for use in conjunction with a GTD audio door station

JP4MED

JKWBA Long Distance Adaptor

The JKWBA is used to increase the cable distance between a colour video door station and the master monitor. It requires 1.2mm polyethylene cable to be used and will not function on any other type of cable. It will increase the cable distance up to 300 meters. It can be used with the following Aiphone models.

JKWBA Manual

JK1MD, JK1MED

JBWBA Long Distance Adaptor

The JBWBA is used to increase the cable distance between a colour video door station and the master monitor. It requires 1.2mm polyethylene cable to be used and will not function on any other type of cable. It will increase the cable distance up to 300 meters. It can be used with the following Aiphone models.

JBW-BA Manual

JF1MD, JF2MED, JA2MED, JA2MECD, KC1GRD, KC1MRD, JB2MD, JB2MED

MYWBA Long Distance Adaptor (discontinued)

The MYWBA is used to increase the cable distance between a black and white video door station and the master monitor. It requires 1.2mm polyethylene cable to be used and will not function on any other type of cable. It will increase the cable distance up to 300 meters. It can be used with the following Aiphone models.

MYW-BA Manual

MK1GD, MK2MCD, MYCU, MK1MD

KC32EU Picture Memory Unit (Discontinued)

This enables pictures to be recorded when a call is made from a video door station, it does not record audio. The KC32EU can be set to record either 4 pictures at 2 second intervals or only a single picture each time the door station calls. Up to 16 frames are stored in 4 picture mode with 16, 32 or 60 pictures installed in single picture mode.

Pictures are time and date stamped so you know when they were recorded. Recording is automatic though there is a set button which if pressed will flash when an image is recorded to prompt you to check. Images are stored in non volatile memory so they are not lost if the power is switched off.

Pictures can also be manually copied to a separate protected memory so they are not erased. A KC32EU is required for each video door station. It can be used with the following Aiphone models.

KC-32EU Manual

KC1GRD, KC1MRD, KB3MRD, MK1GD, MK2MCD

KAWD 30 Degree Angle Box

The KAWD plastic surface box is used when a video door station is installed and it does not have a good view of the area in front of the door. It enables the video door station to be installed on a 30 degree angle from the mounting surface, and can installed on either side of the door. It can be used with the following Aiphone model video door stations.

KAWD Manual

JKDA, , JODA, JFDA, MKDH, MYDS, KCDAR, KBDAR, JADAC, MKDAC

JFWD 30 Degree Angle Box

The JFWD plastic surface box is used when a video door station is installed and it does not have a good view of the area in front of the door. It enables the video door station to be installed on a 30 degree angle from the mounting surface, and can installed on either side of the door. It can be used with the following Aiphone model video door stations.

JKDV, JODV, JFDV, DA1AS, DA2AS, DA4AS

SBX2G Stainless Steel Surface Mounting Box

The SBX2G mounting box is used when a flush mount door station needs to be surface mounted. It is made out of heavy gauge stainless steel. It can be used with the following Aiphone models.

SBX-2G Manual

LESS, IESS, NESS, LEDA, IEJA, NEJA

SBXGTM Stainless Steel Surface Mounting Box

The SBXGTM mounting box is used when a flush mount door station needs to be surface mounted. It is made out of heavy gauge stainless steel. It can be used with the following Aiphone model.

GTDM

MKWR Surface Box (Discontinued)

This plastic mounting box is used when a semi-flush mount video door station needs to be surface mounted. It can be used with the following Aiphone models.

MKDBC, MKDGC, JADGC

MCWS Desk Stand

This stand is used when a video monitor needs to be installed on a desk. Video monitors with a handset are designed for wall mounting and use gravity to ensure the handset correctly engages the hook switch when the handset is hung up. This does not happen if a handset is installed flat on a desk and can result in the handset being left off hook and not receiving calls. It is also useful when LCD monitors are installed on a desk to improve the viewing angle of the LCD display. It can also be used with any of the audio handset models if desired. The MCWS can be used with the following Aiphone models.

JM4MED, JM4HD, JO1MD, JO1FD, GT1C, GT2C, GT1ML, JK1MED, JK1HD, JF2MED, JF2HD, KC1GRD, KC1MRD, KC1HRD, KB3MRD, KB3HRD, JK1MD, JF1MD, JF1FD, JA2MCD, JA2MECD, JA2HCD, MK1GD, MK1HD, GH1MD, GH1KD, GF1MD, GF1MDK